WPE Pro: How to force race/boot

View previous topic View next topic Go down

WPE Pro: How to force race/boot

Post  Admin on Mon Aug 24, 2009 9:59 am

How To Boot/Forcerace

(1) Open WPE Pro, and target the browser you use(Firefox, Internet Explorer, etc.)

(2) Create new packet, with a packet size of 71.


(3)
Type this in the middle porsion:
35 33 02 34 30 30 33 02 32 39 30 39 38 02 32 02 33 34 38 38 35 30 02 32 30 30 31 34 30 36 30 02 2E 2E 44 79 6C 65 6E 68 61 65 72 74 5F 31 30 32 2E 53 65 6C 74 7A 65 72 20 43 6F 6C 65 2E 39 34 37 30 34 32 32 03 00
Type this in the far right:
53.4003.29098.2.348850.20014060...Dylenhaert_102.Seltzer Cole.9470422..

When you're done it should look like this:


(4)Save the packet you just created.

(5) Find the numbers: 20014060

These numbers are someone's profile ID, you will have to change these numbers every time you want to boot/force race.

(6) Go to the person's profile, that you'd like to boot. At the end of the profile's url there will be a fairly short amount of numbers those numbers are called profile ID. Replace the numbers (20014060) with the persons profile ID and press 'Okay'.

(7)You will now have to get the Open Socket ID. Start to record and then stop recording. Right click any packet and click 'Send'. Copy the open socket ID. Once you get the open socket ID you can press 'Quit'.

(8 ) Press the lower play button and you'll have some options. There will be a place asking for you Open Socket ID, you want to put the numbers you just copied in the space next to the words Open Socket ID. And basically all the other settings don't matter.

*Note*
If anyone has anything to add to this to make it better please tell me

Admin
Admin

Posts: 3
Join date: 2009-08-24

View user profile http://xxmimicxx.forumotion.net

Back to top Go down

View previous topic View next topic Back to top


Permissions in this forum:
You cannot reply to topics in this forum